TABLE oF CONTENTS
INTRODUCTION
Laboratory apparatus is commonly found in labs, and these items are useful for performing tests and conducting experiments. They are essential equipment used in a wide range of scientific experiments and research projects, from simple items such as beakers and scales to more complex pieces like microscopes and centrifuges. Some items are safe for anyone to use, while others require special care. Lab apparatus can include anything that facilitates the study or
experiment, including test tubes, pipettes, flasks, and other containers, they can also be found in school labs, medical offices, and other places as well. When you have access to these tools, you can conduct a range of experiments safely. Take a look at the 21 most common laboratory apparatus and their uses.
This Article May Contain Affiliate Links
WHAT IS A LAB APPARATUS?
Laboratory apparatus is a general term for the tools that are commonly found in labs. While everyone has seen beakers, flasks, and test tubes before, some other items might not be as familiar. In many cases, lab apparatus consists of simple or complex tools that are made of materials like glass or plastic. Many of these items come with instructions on how they should be used, and some of them can be used for a variety of things. Each of these tools provides you with the ability to conduct tests or experiments in a more efficient way than if you were using other items.
HOW DO YOU CLASSIFY LABORATORY APPARATUS?
Lab apparatus are usually sub-classified based on the purpose of each tool. Some common types of lab equipment include:
Water Baths – Lab water baths are used to keep items at a precise temperature for an extended period of time, which allows you to conduct certain experiments. There are two main categories that these can be broken down into: hot baths and cold baths. Hot baths heat the item up over time while cold baths cool them off if they are too hot. This type of bath is more commonly known as a heating or cooling bath.
Manual Lab Apparatus – Manual laboratory apparatus are ones that you have to manually manipulate in some way by hand to complete their task. These tools might not actually require any electricity, but you do need to use your hands to complete the process. Lab balances and scales fall into this category.
Electronic Lab Apparatus – Electronic lab apparatus are ones that require an electrical power source and circuitry in order to run properly. Examples of these tools include microscopes, pipettes, hot plates , and more. You likely need someone who has training in electronics if you want to work with any of these materials.
Nuclear Lab Apparatus – Nuclear lab apparatus is a term for equipment that uses radioactive substances or nuclear reactions in order to function properly. Not only do you need special training before using any of these items, but you also need shielding when working with them because they emit ionizing radiation . types of lab equipment are commonly found in chemistry, biology, physics, and more. Lab apparatus are usually made out of durable materials that are long-lasting. Some examples include glass or plastic. While some items cost a fair amount of money, others can be purchased for far less than you might think they would cost.
the links below are not doing it for you? you can browse through our shop for the top selling lab equipment & supplies here on bunker41
WHAT ARE THE BENEFITS oF USING LAB APPARATUS?
The benefits of using lab apparatus are numerous because each item provides you with an easy way to conduct experiments or tests in a specific way that is either faster or safer than if you were doing it by hand. The beauty of most items is that anyone, regardless of experience level , can use them without too much effort. Lab apparatus labels comes with instructions on how to use it safely and effectively, which means you won’t have to worry about anything going wrong.
Lab equipment is also available in multiple different types of materials, so you can choose the ones that are best for your needs.
WHAT ARE LAB APPARATUS LABELS?
Lab apparatus labels are used to mark each piece of equipment with information regarding what it is used for or how its contents should be treated. Labelling these tools might seem like a simple task, but there are actually specific requirements that they need to follow in order to be compliant with safety regulations . For example, they must include the name of the product (or something else that clearly indicates what it is), plus relevant information on how they should be stored or disposed of
when they are no longer needed. Lab apparatus labels can be placed on the individual units, or they can be found attached to a master list that details everything you have in your lab at one time. Lab equipment isn’t cheap, so it’s important to take care of them and label all items accordingly because this helps everyone stay safe during their work. Labelling also helps keep track of everything you have so you don’t overspend money by buying extra equipment when you already have some available to use.
LAB APPARATUS LABELS
What Lab Apparatus Labels Effectively
- Labelling lab equipment helps everyone stay safe during their work related tasks
- Glass vials and bottles for storage or mixing
- Aluminum foil lined bags that are heat sealable for storing small items like single servings of food during experiments
- Pipettes for transferring liquids in controlled amounts without spilling them
- Beakers for holding solids or dissolving chemicals in water
- Hot plate stirrers, small heaters, stir bars, hot plates , or microwaves used to melt solids or mix liquids
- Kimwipes for cleaning up spills, dirty equipment, or bodily fluid specimens
- Test tubes that are used to hold small items like chemicals or prepare biological samples before they’re studied under microscopes
- Trash cans and waste containers for containing any materials that need to be thrown out when an experiment is finished.
WHAT LAB APPARATUS IS USED FOR?
There are many different types of lab apparatus used for different purposes . Some examples include: hot plate stirrers, pipettes, flasksv, microscopes, glassware, balances, goggles, and even test tubes. Lab equipment is extremely versatile, and it’s made to be used with certain chemicals more than others. Lab apparatus is commonly used in chemistry and biology classes or lessons by students at almost every level of education. Lab tools make it easy to conduct experiments quickly and on a smaller scale while providing accurate results that can be presented for discussion or assessment purposes.
21 BEST LAB APPARATUS
1. Microscope
A microscope is one of the most common apparatus found in a lab. You can use it to magnify tiny objects and examine them. For example, you can look at the cells of a plant or a skin. The most common microscope is called a compound microscope, and it has a base, an illuminator that produces light, a stage with clips where the specimen sits, lenses, and an eyepiece. It is used to get a closer look at items that you can’t see with the naked eye.
2. Volumetric Flasks
Volumetric flasks are used in labs to measure liquids. They hold a precise amount of liquid, so they give you a more accurate measure than common measuring cups. These flasks can hold 500 of fluid, and they are great for chemistry experiments because chemists require very precise measurements of liquid chemicals.
3. Bunsen Burners
A Bunsen burner is a gas burner that produces a single flame. You find this type of apparatus in school labs and chemistry labs because people use them to create and observe chemical reactions. Scientists can use them to sterilize an item or to produce a specific reaction. They can also bring about combustion for observation.
4. Test Tubes
Test tubes are made of glass, and they are very common apparatus in science labs. They allow you to measure and observe because you can see inside. They are long and narrow. You can also use them to view, hold, and transport all kinds of items such as chemicals, viruses, and more.
5. Triple Beam Balance
A triple beam balance is a scale that is important in many kinds of experiments. In science, people need to know the exact measurements of objects, especially the mass. This type of scale allows you to measure the mass of an object. There are weights attached to the beams with the ability to measure very specifically, and this piece of lab equipment is very important in any science lab.
6. Voltmeter
A voltmeter is an electronic meter that measures the voltage that exists between two points of an electrical circuit. Some of these can measure direct current (DC) and others measure alternating circuit (AC). Scientists can use these devices to measure reactions that might occur during an experiment.
7. Beakers
Beakers are used to measure liquids for experiments. They come in many different sizes, and you can hold, heat, and mix fluids in them. They usually have a flat bottom so they can sit on a table. They are safe for many different chemical reactions you might observe.
8. Droppers
Droppers are another apparatus found commonly in a science lab, and they are made of glass. They have a rubber top that you can squeeze to draw in the liquids and other solutions. You can use them to measure and mix small amounts of different substances.
9. Stirring Rod
Stirring rods are used to stir up mixtures and help make chemical reactions. They are made of glass, and they are very sturdy and durable. They are important apparatus because glass is one of the only materials that can be used to stir certain chemicals safely.
10. Thermometer
A thermometer has the ability to take precise measurements of substances in a science lab, which is critical for certain experiments. They can be fully immersed or partially placed in the substance that is being measured. It can be used to measure the boiling point and the melting point of various substances, andbthis can give insight into the properties of these substances.
11. Magnifying Glass
A magnifying glass is another common apparatus in the science lab. It can be very useful for examining the details of an insect or something that doesn’t fit on the slide of a microscope. You can observe many different aspects of nature when you have a magnifying glass at your disposal. Kids can learn how many legs a tiny ant has or what the inside of a flower looks like.
12. Pipette
Pipette droppers are made of glass with a rubber end, and they are used in medicine and in science laboratories. They can measure liquid substances and transfer them to a different container. They can draw in a particular measure, and it is easier to get the liquid in and out with the rubber on the end. They are clear, which allows you to see what is inside, and you can observe any changes or reactions that take place.
13. Beaker Tongs
Beaker tongs are made of metal with rubber ends, and they are used to handle hot beakers. They are very useful apparatus and a necessary piece of equipment in every science lab. They come in different sizes so that you can get the best ones for the size of the beakers you are handling in the lab. They are also used to hold evaporating dishes and flasks.
14. Lab Funnels
Lab funnels come in different sizes, and they are very important apparatus in science labs. They are made of glass so they are safe to work with different chemicals, and you never have any trouble when you are mixing chemicals, separating liquids, filtering materials, and more. Funnels are absolutely necessary in any science lab.
15. Goggles
Goggles are an important apparatus in any laboratory because many different experiments can harm your eyes. They will contour to your face and fit snugly so there is no chance of any debris or liquid making its way inside. Many of the chemicals used in science experiments can cause permanent blindness if they come into contact with the eyes, so this is a critical item to have.
16. Graduated Cylinder
Graduated cylinders have hexagonal bases so they can stand freely while they are used to measure liquids. They have the ability to take very precise measurements, and they have lines. marked up the side to measure the volume of various liquids. They come in different sizes so you can choose the best size for the substance you are measuring.
17. Mortar and Pestle
A mortar and pestle set is a tool that has been used since ancient times to crush and grind substances into a fine powder or paste. This apparatus has been used in science labs to crush chemicals and other substances before you use them in an experiment. This makes it easier to dissolve these substances into solvents. The mortar is a bowl made of hard stone, and the pestle is shaped similar to a small club and it crushes the substance against the sides of the bow.
18. Test Tube Brush
Test tube brushes are important because there is little else that will clean substances out of test tubes. It is important to clean science lab apparatus as soon as you are finished using it because the chemicals can be very dangerous. Test tube brushes make this possible because they are designed to slip inside the test tube and scrub the sides until they are clean and safe for future use.
19. Watch Glass
A watch glass is used as a beaker cover, or you can use it to dissolve or vaporize liquid. It is made in the shape of a circle, and it is concave so that it can hold liquid inside. It can also go over the beaker as it is heated. Because it is made of glass, it is safe to hold very high temperatures, and it is also safe for use with various chemicals.
20. Test Tube Rack
A test tube rack is where you will keep your test tubes. This piece of equipment is used to hold, store, and support laboratory test tubes so you can perform a more complex experiment. They make it much easier when you are working in the lab.
21. Striker
A Bunsen burner striker is the safest way to light a Bunsen burner when you need to heat items up in the lab. This device is longer than a match so you will not burn your fingers, and it produces sparks to light the burner, as opposed to open flames. It is safe and allows you to control your experiment, and it minimizes the risk of catching something else on fire.
WHY DO SCIENTIST NEED LAB APPARATUS?
You can perform a lot of experiments and tests with basic household items, but you will get better results if you use the proper tools. Lab apparatus provide consistent and reliable results. Lab equipment includes devices that are made specifically for certain types of experiments. In many cases, they have been precisely calibrated so that they provide accurate measurements every time you use them.
FINAL WORDS
There are many different types of laboratory equipment that are important in any lab. These items are made with safety in mind because scientific experiments often involve mixing dangerous chemicals or examining items that can be harmful if ingested. Science requires precision in its measurements, and these items allow you to measure size, shape, mass, volume, and more. When you have the right equipment, you can conduct many different experiments safely.
